Kneadatite Putty and Sculpting Blanks

Save on Kneadatite Putty and Sculpting Blanks at TheWarStore!

Kneadatite Epoxy Modeling Putty (Green Stuff - 3.5oz/100g)

We went straight to the source to get you the Green Stuff you need for your modeling projects! The exact same product as GW's blisters, but we got it for you wholesale so you get over 4 times as much!
You know Kneadatite Green Stuff - it is fantastic for filling model joints, plugging slots in bases, and of course for full scale sculpting! Kneadatite's extremely smooth and non-grainy texture make it the best product available for modelers and sculptors. Kneadatite Green Stuff features:

• Long work life (1-1/2 to 2 hrs.);
• Ability to hold fine detail;
• Excellent adherence to almost any surface
• Flexible even after cure - it doesn't snap under stress;
• Withstands high heat (325ºF) and up to 2,000 pounds of pressure during the mold making process.

SKU KNEAD

SKU: KNEAD

 
I need:
Kneadatite Epoxy Modeling Putty TAPE (Green Stuff - 3.5oz/100g TAPE)

SKU:
KNEADTape

 
I need:
Kneadatite Epoxy Modeling Putty TAPE -- Approx 6 Inches

SKU:
KNEADTape06

 
I need:
Kneadatite Epoxy Modeling Putty TAPE  -- Approx 12 Inches

SKU:
KNEADTape12

 
I need:
ProCreate Stick Putty  (45g)

STICK Putty is a pre measured, ready to mix, 2 part epoxy putty. In only minutes it forms a tenacious bond to steel, pewter, iron and many other surfaces (does not adhere to polyethylene or polypropylene). Use to customize figures, repair terrain, build up armature and understructure.

Click to enlarge the picture for the informative company sell sheet.


SKU:
KM-STIC

 
I need:
ProCreate Epoxy Sculpting Putty  (2.5oz)

ProCreate is a new generation of epoxy putty formulated specifically for the professional artist to create original miniature sculpture. ProCreate has a fine, non-grainy consistency that makes it easy to mix, sculpt, smooth and allows for extremely fine detail.

The unique ProCreate formula allows for easy customization of work life and hardness/flexibility by varying temperature and the mix ratio of base to hardener. The standard mix ratio of 1:1 at 75°F (24°C) allows for a work life of around 120 minutes. A temperature decrease of about 20°F (11°C) will double the work life. Likewise an increase of the same temperature will result in half the work original life. Note that curing above 95°F (32°C) is not recommended since it can soften the mixed putty and result in the loss of sculpture shape and detail. A more flexible cure may be achieved for organic shapes by using more of the black colored hardener. A harder cure may be achieved for hard edges, machines and for easier standing and filling by using more of the white Base putty (see ratio chart for more details).

Gray was specifically selected to be the final mixed color for Procreate. Gray allows fine detail work to be observed more easily and results in less eye strain.


SKU:
KM-PRO

 
I need:
Magic Mold Clear - 10 Bars

SKU:
FBG MM001

 
I need:
Magic Mold Black - 10 Bars

SKU:
FBG MM002

 
I need:
Magic Mold Blue - 10 Bars

SKU:
FBG MM003

 
I need:
Magic Mold Green - 10 Bars

SKU:
FBG MM004

 
I need:
Magic Mold Red - 10 Bars

SKU:
FBG MM005

 
I need:
Magic Mold Yellow - 10 Bars

SKU:
FBG MM006

 
I need:
Reaper Advanced Dollies - LIMITED

SKU:
RPR 75002

 
I need:
Reaper Heroic Sculpting Blanks (4) - LIMITED

SKU:
RPR 75004

 
I need:
Dark Heaven Heads

SKU:
RPR 75010

 
I need:
Green Stuff (6Strip)

SKU:
RPR 75006

 
I need:
Testors Plastic Putty  (5/8 oz)

SKU:
TES 3511X

 
I need: